Archive for the ‘sketchup’ Category

Garage Doors & ect.

Friday, May 28th, 2010

Yeah. They are gross.

I’m seriously considering replacing the warped and rotted doors with commercial steel roll up doors. I like that they are cheap, take up a small amount of space and have a linear horizontal pattern. It’s a thought, but nothing has been decided. It’s an idea for “The Future”. I think for now we will paint them black and figure out the next step later.

I’ve continued thinking about the back patio since the last post. I’m kind of sold on eventually installing a tankless water heater so that we can at least free up that tight corner.

The other thing I was wavering about was continuing the slats on the back patio. I’ve been trying to figure out how we could get rid of at least one of the three stupid doors and not do any major masonry cutting and rearranging. We always try to create the most impact for the least amount of money and skill required. Any MAJOR rearranging of exterior exits of the house is not an option. Every opening in the house is lined with custom bull-nosed cement bricks from 1950 and they don’t make that shit to patch things up with anymore. Plus we don’t know how to do it and we can’t afford it and I’m not convinced that the investment will pay off in the long run in our neighborhood.

So…my idea is to make a solid redwood wall that intersects with the open slats that will essentially “cover” the weird third exterior door. On the inside of the bathroom we can just rip down molding stick some insulation in and drywall over the door. *POOF* Door gone. It would not a huge investment, it creates more interior space in the bathroom and we are totally DIY capable of doing it.

Afterwards we can throw a butterfly chair and a small table in that new alcove. Then the little useless back porch area becomes a sitting destination, or smoking area since that seems to be what most visitors use it for.

BTW – one of my dream pieces of furniture is a Richard Schultz petal table. Drool…

My favorite part of the front porch slat screen is the area that wraps around the side of the house. I think it would be nice to mimic that on the back porch and create an architectural division of the various exterior areas into more manageable rectangles.

Also, check it out! I fixed those pesky fake shade sails to look more accurate. I think I’m kind of sold on them. They are pretty cheap, but make a giant statement whilst keeping the hottest (most sun exposed) side of the house a bit cooler.

Apologies for the gratuitous sketchup posts. I know…boring ideas for the future…less talk more action! But now that we are moving along with the exterior I want to make sure to really plan everything out so that we use our money wisely by really thinking through the entire design and hopefully keeping it all cohesive. Plus, your guys tips and experience with things like water heaters, plants, shade sails, paint, ect. have really helped us figure out the potential cost/problems/solutions that we might encounter. It’s amazingly helpful.

More bits

Wednesday, May 19th, 2010

Our back porch is a monstrosity. It still looks exactly the same (and has the same issues) since my last house burn out.

Here is a sketchup rendering of the direction we are kind of considering going in. Whoops, that door placement is a little funny.

The water heater is still a fucking disaster. I want to go tankless, the Boy is not convinced. I’m not convinced that the investment will be worth it considering our neighborhood and the city. Our water heater works fine, it’s just U.G.L.Y it ain’t got no alibi, its ugly. But it may be worth saving up for tankless. Even for the aesthetic benefits.

I’ve been toying around with the idea of just building a new water heater box that is slatted (with an opening door of course) that is a little tighter than the sketchup views (so you see less of the ugly) but still allows ventilation, which our home inspector said we don’t have enough of…like over two years ago…

And then I got all slat happy and was like “Why not just stick slats everywhere!”.

These are gratuitous slats, there is no real sun blocking function since it’s already a covered patio and it would actually block a whole section we could walk through to the garage. The thing is, we never really walk that way since there is so much crap stored right there so I’m not sure that it’s a walking area we can’t give up easily. Plus I like that it is cohesive with the front slats and divides and defines the patio space and the “atrium” space that leads to the garage and the fire pit.

Probably not going to build it, but it was a thought…

Behold, “The Pipe That Goes Nowhere for No Reason”.

We haven’t quite figured out how to remedy this pipe situation. It is connected to the main faucet and wraps around the whole side of the house for seemingly no purpose. We want to remove it, but can’t figure out how to reattach it to the facet. The pipes would need to be cut and sweated and a custom little chunk would have to fit the weird two inch gap.

Maybe we need a plumber.

Our ghetto bathroom/laundry room door is still a mess with more pipes that go nowhere and that awesome dryer vent. None of that can get fixed till we remodel the bathroom…which seems years away. I’m not really sure how to even pretty it up till then. We can’t even install a new door till the wiring and venting issue is solved.

There is a small pony wall that divides the breezeway space from our side yard. I’ve been kicking around ideas about how to address this hunk of cement and think I may want to build a planter like this:

Filled with Mexican feather grass. Probably not in a steel planter, more likely something wooden clad.

Which reminds me, our garage doors are bowed and in horrible shape. So those need work too! Hooray.

Sorry for the rambling bits of this post, these are just a few problems that are reasserting themselves as we are continue painting. Even if we get most of the painting done there is still going to be a mess of ugly that needs fixing.

Shade Sail

Thursday, May 13th, 2010

Now that the house is getting painted and the exterior is slowly coming together I’ve started to think (once again) about shade sails. While the above installation is not the most glamorous example of a shade sail, the structure and design is pretty similar to what I’m considering installing in our side yard.

Residential applications are a little less industrial and hazardous looking…

Our side yard takes a beating during the long summer days and could use a bit of relief from the desert sun. If we create a little outdoor dining / ping pong recreation area I’d like to alleviate some of that intense heat with a pair of rectangular gray sun shades that are attached to the eaves of the house and then strung out and fastened to three large metal poles cemented into the ground.

Instant shade.

Here is a mock-up in Sketchup of what I’m sort of thinking :

I’ve been looking around at shade sail manufacturers and found Tenshon whose 9′ x 14′ shade might just work perfectly in grey. At $169.00 each they are not totally unreasonably priced.

Here are some examples of Tenshon shade sails :

I haven’t been as impressed with the quality, pricing and color options (as well as size customization) at other manufacturers, but I’m still looking around.

It’s probably premature to start really planing this project (but I just love to plan and then get depressed waiting to do it for real) so my question for you is:

Has anyone installed a sun shade? Any tips or things to be weary of? Is this look dated or is it awesome?

Thanks!